Login | Forgot password | Register

X

What is OpenID?

OpenID is an Internet-wide identity system that allows you to sign in to many websites with a single account.

With OpenID, your ID becomes a URL (e.g. http://username.myopenid.com/). You can get a free OpenID for example from myopenid.com.

For more information visit the official OpenID site.

192 Posts in 38 Topics by 34 members

Jump to:
Search

Amiga OS Projects

Forums » Amiga OS Projects » SAM440ep(mini) Radeon9250 vs HD2400XT

Please read the terms of service before posting. If this is your first visit, you will need to register before you can post. However, you can browse all messages below.

Page: 1 , 2 Go to End
Author Topic:SAM440ep(mini) Radeon9250 vs HD2400XT 24230 Views
  • fingus
    Avatar
    Community Member
    10 Posts

    SAM440ep(mini) Radeon9250 vs HD2400XT Link to this post

    Hello,

    i own the SAM440ep(mini) and my onboard M9 died some month ago. So i put an Radeon9250 on the PCI-Slot. Sadly the Slot is only 33Mhz and DMA don't work, that makes it terrible slow in compare with the 66Mhz DMA onboard M9.

    Because of Science and Support, i bought the HD-Driver to Support this great Project.

    I test a HD2400XT that i found in our Companys Electro-Recycle-Bin. The Adaptor is this PEX8112 thing.

    Here are the Results:

    Radeon 9250: http://hdrlab.org.nz/Benchmark/GfxBench2D/Result/1051
    HD2400XT: http://hdrlab.org.nz/Benchmark/GfxBench2D/Result/1058

    The Compositing-Performance is much better, but why is the Memory-Performance of the HD2400xt not better than the 9250?

    DMA turned on with the RadeonHD-Driver don't seem to work.

    Is DMA on the SAM440ep(mini) not supported?

    Infact i only need fast Web-Browsing (scrolling of pages after load), so is it possible with this system or should i upgrade to 460ex?

    I´m using a Sam440ep/667Mhz/512MB/Amiga OS4.1 over DVI on 19" Samsung TFT (1280x1024x32bit).

  • Spectre660
    Avatar
    Community Member
    54 Posts

    Re: SAM440ep(mini) Radeon9250 vs HD2400XT Link to this post

    @ Fingus

    Try runing the Sam440ep_Setup utility to speed up your system with the adapter .
    Note the settings to set the speedup for the secondary graphics card.

    http://os4depot.net/index.php?function=showfile&file=utility/shell/sam440ep_setup.lha

    Title:

    Sam440ep_setup

    Description:

    A little utility to optimize performance on your Sam440ep board (mini-itx and flex versions)

    What it does:

    * on some Sam440ep boards, the MMUCR register is not set correctly at bootstrap.
    This leads to poor write L1 cache performances.
    The utility check the register, and if needed, modify it.

    * on all Sam440ep boards with a Radeon card enables read prefetching for graphic ram.
    If a Radeon card is detected, the utility will modify the POM2 PCI registers to
    enable read prefetching.
    This speed up reads for the gfx card from 15 MB/s to 30 MB/s on a M9 card.

    * set the Latency Timer on the 440ep PCI Bridge,
    With this new setting read speed increase around 50% on Radeon PCI cards
    (up to 42 MB/s on a M9 card) and around 200% on RadeonHD PCI cards

  • Spectre660
    Avatar
    Community Member
    54 Posts

    Re: SAM440ep(mini) Radeon9250 vs HD2400XT Link to this post

    @ Fingus

    Here are the results for the Memcopy part of the GfxBench2D that I did a few weekes ago on my Sam440ep-Flex 800Mhz .Using the second slot # 33mHz and the first slot # 66MHz. Note the write pixel array score is almost 10 times faster with DMA and a 66mhz slot.I have the Sam440ep_setup utility enabled.This is with a Radeon HD5670 and adapter .

    33mhz with DMA off

    MemCopy Score: 23.47
    Operation   MiB/s
    Copy to VRAM   9.63
    Write Pixel Array   9.66
    Copy from VRAM   13.81
    Read Pixel Array   13.82

    66Mhz with DMA on

    MemCopy Score: 97.01
    Operation   MiB/s
    Copy to VRAM   13.55
    Write Pixel Array   90.51
    Copy from VRAM   20.96
    Read Pixel Array   27.33

  • fingus
    Avatar
    Community Member
    10 Posts

    Re: SAM440ep(mini) Radeon9250 vs HD2400XT Link to this post

    I did have the SAM440ep_utility in place since first release.

    I think the biggest break is the fact that the SAM440ep mini PCI is just running with 33Mhz instead of 66Mhz and Direct Memory Access can´t be turned on for it. So the breake breaks two the times

    I´m using a Sam440ep/667Mhz/512MB/Amiga OS4.1 over DVI on 19" Samsung TFT (1280x1024x32bit).

  • Spectre660
    Avatar
    Community Member
    54 Posts

    Re: SAM440ep(mini) Radeon9250 vs HD2400XT Link to this post

    @Fingus

    try activating the tooltype SNDGFX in the Sam440ep_Setup utility by removing the brackets.
    The Graphics card in the PCI slot is the secondary card in your case.In the default setting the speed up is being applied for your onboard M9.

  • fingus
    Avatar
    Community Member
    10 Posts

    Re: SAM440ep(mini) Radeon9250 vs HD2400XT Link to this post

    The Graphics card in the PCI slot is the secondary card in your case.In the default setting the speed up is being applied for your onboard M9.

    But i did change the output-device in Uboot from internal to external.

    I will try some setups with the sam440_setup utility and hopw i can get better results/experience with radeon 9250 or my hd2400xt

    I´m using a Sam440ep/667Mhz/512MB/Amiga OS4.1 over DVI on 19" Samsung TFT (1280x1024x32bit).

  • fingus
    Avatar
    Community Member
    10 Posts

    Re: SAM440ep(mini) Radeon9250 vs HD2400XT Link to this post

    sam440ep_setup SNDGFX FORCEPOM
    (added to user-startup)

    VRAM to RAM & ReadPixelArray Radeon9250:

    BEFORE: 5 MiB/s (http://hdrlab.org.nz/benchmark/gfxbench ... esult/1051)
    AFTER: 12 MiB/s (http://hdrlab.org.nz/benchmark/gfxbench ... esult/1059)

    240% faster read

    VRAM to RAM & ReadPixelArray Radeon HD2400XT:

    BEFORE: 1,5 MiB/s (http://hdrlab.org.nz/benchmark/gfxbench ... esult/1058)
    AFTER: 10 MiB/s (http://hdrlab.org.nz/benchmark/gfxbench ... esult/1060)

    667% faster read

    Not bad!
    I hope DMA can be enabled some day on sam440ep Mini

    I´m using a Sam440ep/667Mhz/512MB/Amiga OS4.1 over DVI on 19" Samsung TFT (1280x1024x32bit).

  • Hans
    Avatar
    Administrator
    231 Posts

    Re: SAM440ep(mini) Radeon9250 vs HD2400XT Link to this post

    @fingus

    I hope DMA can be enabled some day on sam440ep Mini

    I'm surprised that DMA isn't enabled, because I know for a fact that DMA is used on the Sam440-flex.

    http://hdrlab.org.nz/benchmark/gfxbench2d/OS/AmigaOS/Result/916

    Since it's the same CPU,** it should be enabled on the Sam440ep too. Are you sure that you haven't disabled DMA somehow via the ENV variable?

    If DMA doesn't work with the 33 MHz slot, then this is news to me.

    Hans

    ** Picasso96 uses the CPU's own DMA engine with Sam4x0 processors.

    24230 Views
Go to Top

Currently Online: There is nobody online.

Welcome to our latest member: SeregaRit

Forums » Amiga OS Projects » SAM440ep(mini) Radeon9250 vs HD2400XT